Difficulty: Advanced
Time: 1 hour
Yields: 7 lbs. of soap
This beautiful Butterfly Swirl is inspired by the nonpareil paper marbling of old (not sure what a nonpareil pattern looks like? Check out the beautiful handmade paper that inspired this tutorial for a good example!). Four different tones create dynamic complex and rich patterns both on top of the soap and within the bars themselves. It is the perfect recipe for giving these new swirl tools a whirl.
What You’ll Need:
24 oz. Canola Oil
16 oz. Coconut Oil
4 oz. HempSeed Oil (refined)
4 oz. Mango Butter
20 oz. Palm Oil
12 oz. Rice Bran Oil
10.9 oz. Sodium Hydroxide
26.4 oz. Distilled Water
3.8 oz. Lychee Red Tea
1.2 oz. Peppermint Essential Oil, 2nd Distill
Titanium Dioxide
Aqua Pearl Mica
Activated Charcoal Powder
Fired Up Fuchsia Pigment
Ultramarine Violet Oxide
18 Bar Birchwood Mold
Liner for 18 Bar Mold
Comb Swirl Tool
Click here to add everything you need for this project to your Bramble Berry shopping cart!
If you’ve never made Cold Process soap before,stop here! I highly recommend checking out our FREE four partSoapQueen.tv serieson Cold Process Soapmaking, especially the episode onlye safety. And if you’d rather do some reading, Bramble Berry carries a wide range ofbookson the topic, including my newest book,Soap Crafting. You can also checkout thedigital downloadsfor that instant gratification factor.
SAFETY FIRST:Suit up for safe handling practices! That means goggles, gloves and long sleeves. Make sure kids, pets, and other distractions and tripping hazards are out of the house or don’t have access to your soaping space. Always soap in a well-ventilated area.
COLOR PREP: Disperse 1 teaspoon of Aqua Pearl, Activated Charcoal, Fired Up Fuchsia and Ultramarine Violet into 1 tablespoon of liquid oil (we like Sweet Almond or Sunflower oils). Disperse two teaspoons of Titanium Dioxide in 2 tablespoons of liquid oil. Prepping your colors in the beginning will allow you to work quickly and give you more time to work with your soap. Use the mini mixer to get all those clumps worked out smoothly.
FRAGRANCE BLEND: In a glass container, combine the Lychee Red Tea Fragrance Oil and the Peppermint 2nd Distilled Essential Oil. Give the mixture a good stir and then set it aside.
ONE: Slowly and carefully add the lye to the water, and stir until clear. Set aside to cool. If you’d like a harder bar of soap that lasts longer in the shower, you can add Sodium Lactate to the cooled lye water. Use 1 teaspoon of Sodium Lactate per pound of oils in the recipe.
TWO: Melt and combine the Canola, Coconut, Hempseed, Mango, Palm and Rice Bran oils in a large glass container. Once the lye water and the oils have cooled to 130 degrees or below (and are ideally within 10 degrees of each other), add the lye water to the oils and stick blend until thin trace.
THREE: Equally split the batter into 5 containers. Then use a wire whisk or spatula to stir in one colorant per container at the following rate:
• ½ teaspoon dispersed Titanium Dioxide and 1 teaspoon dispersed Aqua Pearl
• ½ teaspoon dispersed Activated Charcoal and 1 teaspoon Titanium Dioxide
• 1½ teaspoon dispersed Titanium Dioxide
• 1½ teaspoon dispersed Fired Up Fuschia and 1 teaspoon dispersed Titanium Dioxide
• 2 teaspoons dispersed Ultramarine Violet
FOUR: Once you’ve fully incorporated the colorant, split the fragrance blend between the five containers and mix with a whisk or spoon.
FIVE: Once the fragrance has been fully incorporated, pour each color into its own condiment bottle. Fill each bottle about halfway (6 oz.) full.
SIX: Beginning in the bottom left-hand corner of the mold, pour about half of the remaining color in your mixing containers in a diagonal zigzag motion. Repeat this pattern with each color, layering one color on top of another and keeping the same order.
SEVEN: When you have used about half the soap in all five containers, change your pour pattern. Begin at the far left hand corner and pour the soap in the same diagonal zigzag pattern across the mold to the near right hand corner. Repeat this process until all the soap in the containers is gone.
EIGHT: Insert a chopstick or dowel into the soap beginning in the near left hand corner. Drag the tool in a diagonal zigzag pattern to the far right hand corner.
NINE: Using the condiment bottles, squirt each color vertically across the mold. Repeat this pattern layering colors on top of each other in the same order until you have about 2 oz. of soap in the bottles.
TEN: When you have about 2 oz. left in your bottles, start making your lines more purposeful. Carefully lay down lines of thick color, working your way from one end of the mold to the other. Space your color lines about an inch apart.
TEN: Using a chopstick or dowel again, start in the far left-hand corner and make a diagonal zig-zag across the mold to the lower left-hand corner. And then, back again.
ELEVEN: Drag the Comb Swirl Tool in a slow and smooth motion from the top of the mold to the bottom. Lift it straight up out of the soap, and the design is done!
Spray the entire top with91 or 99% Isopropyl Alcoholto reduce soda ash. Cover andinsulate for 24 hours and unmold after 3-4 days, and allow to cure for 4-6 weeks.
